Nitrogen gets the headlines, but for a whole set of industries the gas that matters is oxygen — for ozone generation, aquaculture, wastewater treatment, glass furnaces and oxy-fuel cutting. On-site PSA oxygen generation follows the same logic as on-site nitrogen: make it from air, pay for electricity instead of deliveries. Here is what buyers actually need to know, starting with the number that surprises everyone.

Why 93±3% — and Why That Is a Feature, Not a Limitation

PSA oxygen generators use zeolite molecular sieve, which adsorbs nitrogen (and, unavoidably, argon) and lets oxygen pass. Because argon travels with oxygen, the product naturally plateaus at 93±3% O₂ — the internationally recognized band for industrial oxygen supply. For most oxygen applications this is exactly the right gas:

ApplicationWhy 93±3% worksTypical demand
Ozone generationOzone yield improves with O₂ feed concentration; 93% is the standard feed specFeed-matched to ozone unit
Aquaculture / RASDissolved-oxygen targets are met well below pure O₂; oxygen cones love 93%5-20 Nm³/h per line
Wastewater treatmentO₂ enrichment for aeration basins and odor control10-100 Nm³/h
Glass furnace enrichmentCombustion enrichment at 93% delivers most of the fuel saving20-200 Nm³/h
Oxy-fuel cutting & weldingCutting quality unaffected between 93-99.5%5-50 Nm³/h
High-purity usesNeeds 99.5%+ → add a purification stage, or reconsider the specper process

How the Generator Is Sized

  • Flow: your peak oxygen demand plus 20% headroom — oxygen users rarely have buffer storage, so the generator carries the peak.
  • Pressure: standard output 0.1-0.4 MPa covers most ozone units and diffusers; booster available for special duties.
  • Air supply: the oxygen generator needs ~10× its output in compressed air (zeolite PSA recovery is lower than nitrogen PSA) — the compressor sizing is where most first-time buyers get caught.
  • Duty cycle: zeolite beds handle continuous duty well; tell the factory your on/off pattern so the valve schedule is configured for it.

Running Cost: The Number That Decides It

System-level electricity consumption runs about 0.4-0.6 kWh per Nm³ of oxygen. Compare that with delivered gas at typical international prices and continuous duty usually pays the investment back in 12-24 months — the same payback logic as on-site nitrogen, and our cost calculator lets you run the math for your own electricity price and current supply cost. The same factory that builds your oxygen plant builds nitrogen plants: shared air treatment, shared control philosophy, shared spares and service.

What to Check Before You Buy

  • Zeolite brand and replacement interval (typically 5-8 years, same family as nitrogen CMS economics)
  • Whether the quoted package includes the air compressor and pretreatment — the classic hidden-cost trap
  • O₂ analyzer inclusion for continuous purity monitoring (you cannot manage what you do not measure)
  • Factory acceptance testing with video — the standard we apply to every unit

Frequently Asked Questions

Why is PSA oxygen 93±3% instead of 99.5%?
Zeolite PSA adsorbs nitrogen and argon together — argon slips through with the oxygen, so the product plateaus at 93±3% O₂. That band is the internationally recognized standard for industrial and most medical supply, and pushing past it requires a separate purification stage. For ozone, combustion and aquaculture duties, 93±3% is exactly what the process wants.
Can a PSA oxygen generator reach 99.5%?
Yes, with an added purification stage (pressure-swing refine or catalytic deoxidation), but it multiplies cost. Most 99.5% users are actually better served by reviewing whether 93±3% truly fails their process — many spec high purity out of habit.
What flow do I need for aquaculture or fish farming?
A common design point is 30-100 g O₂ per kg of feed, converted through your oxygen-cone or diffuser efficiency. As a rough bracket, intensive RAS systems order 5-20 Nm³/h per production line; we size it against your stocking density and water exchange rate.
How does the running cost compare with bottled or liquid oxygen?
PSA oxygen runs on electricity — roughly 0.4-0.6 kWh per Nm³ of O₂ system-level. Against delivered oxygen at typical international prices, on-site generation usually pays back in 12-24 months for continuous duty, with the same logic as on-site nitrogen.
Can one factory supply both nitrogen and oxygen systems?
Yes — the PSA principle is shared (both separate air on adsorbent beds), so air treatment, control philosophy and factory testing are common. Plants needing both gases often order from one manufacturer to share spares, training and service.